The FM203-10 Duel Soldering, Desoldering and Rework Station is a compact, duel port soldering station that enables soldering, desoldering, and SMD rework all with a single unit. The FM-203 twin ports allow for simultaneous use of a variety of soldering, desoldering and rework tools. The FM-203 comes supplied with a soldering iron (Hakko FM2027) but is also compatible with the below tools:
- FM2032 Micro-Soldering Iron for small or intricate components,
- FM2030 Heavy Duty Soldering Iron for larger components
- FM2026 and FM2031 Nitrogen Soldering Irons (requires N2 Source) for improved work flow.
- FM2022 and FM-2023 SMD Hot Tweezer Rework tools
- FM2024 Desoldering gun (requires compressed air source and desolder control box)
Please see below examples of tool combinations in the two channels D and S. Note: some combinations are not possible due to the power consumption of the hand piece. |
| |||||||||||||||||||||||||
Poweful thermal recovery performance | |||||||||||||||||||||||||
See how much its thermal recovery is improved by using a composite tip |
Power save function | ||
Sleep function | : | While the handpiece is being placed on the iron holder (HAKKO FH-200), the sleep function is activated and decreases the temperature of tip on the holder up to approximately 200°C , preventing the tip from being oxidized. In addition, this function can relieve the load applied to the tip due to the high-temperature settings required for lead-free soldering. |
Auto power shut-off function | : | By connecting the iron holder (HAKKO FH-200) and station with the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function. |
Combined use with an optional handpiece (HAKKO FM2026, etc.) enables use of the N2system | ||
Buzzer ON/OFF setting is available | ||
Buzzer ON/OFF setting control the buzzer sound for errors when the target temperature is achieved. |