FR-702 Multi-Port Soldering, Desoldering and Rework Station
SKU: HFR702-72
Availability:
Low stock – Order soon
4 in 1 Station – Soldering, Desoldering, Hot Air and SMD Rework Combined Features save workbench space for efficiency Includes Desoldering Tool and nozzle, Soldering Iron and Tip and Hot Air Tool (Nozzle NOT included). For more info see packing list. Muli port allows symultanious use of tools
Includes Soldering Iron Tip and Desoldering Nozzle
FR702-72 Multi-Port Soldering, Desoldering and Rework Station is a 4 Port Rework Station with 140 W desoldering gun, M-type soldering iron and 670W hot air
FR702-72 Multi-Port Soldering, Desoldering and Rework Station handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types.
Other than the standard handpieces of 140 W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type.
Desoldering gun HAKKO FR-4103
– 140 W high powers enable perfect desoldering for the components on multi-layer PWB.
– A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works.
Soldering iron M type HAKKO FX-8801
– Takes T18 tip series with improved thermal conductivity
Hot air handpiece
– It enables quick removal of components with high power and large volume hot air for a various kinds of rework.
– Vacuum function with indicator makes it possible to remove components easily and safely.
Increasing the power to 140 W from 50 W of our previous models (HAKKO 474/475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time. A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works. – Long type nozzles for narrow space – Oval shape nozzles for flat terminals – SS type nozzles for micro land-patterns
Thermal conductivity has been increased by reviewing external configuration and internal structure of 900 tip series. Now T18 and T19 tip series are selectable depend on work environment.
Hot air handpiece
670 W high power and large volume hot air improves work efficiency.
High power and large volume hot air for quick removal of components
Hot air handpiece
670 W high power and large volume hot air improves work efficiency.
High power and large volume hot air for quick removal of components
New type of nozzles for improvement of temperature characteristics
The new nozzle improves work efficiency with uniform heating by hot air convection inside the nozzle which is created due to vents on the nozzle top. (only with BGA nozzles)
Vacuum pickup function
The vacuum pick up function is to pick up a component with a suction pad and vacuum. It will pick a component only after the hot air melts solder joints. This can avoid an error to peel off the land by removing a component with excessive force.
Pickup indicator lets you know the pickup timing at a glance!
By pre-setting pickup function, a component can be picked up automatically when solder is melted. Then, the indication comes up and the moment of picking up will be visible. Even a component and solder joints cannot be seen as covered by a nozzle, easy and safe picking up is possible.
Soldering Iron Holder (FH-800 with cleaning wire (A1561) and Sponge (A1559)
Desoldering Gun holder (FH410 with cleaning wire pot 599B)
Handpiece holder for hot air (B5048)
Tool box : (C5030)
Includes:
Cleaning pin for heater (B1215)
Cleaning pin for ø1.0 mm Nozzle (B1087)
Cleaning drill for ø1.0 mm (B1303)
Nozzle wrench (B5106)
Filter [qty 2] (A5020)
Ceramic paper filter [qty 4] (A5044)
Hot Air Tool Suction Pads (Φ3mm (A1520), Φ5mm (A1439), Φ7.6mm (A1438) qty 2 each)
Heat resistant pad (B2300)
Vacuum Pipe Control Knob (L with screw), (B3023)
Color band (qty 2), (B5125)
FR-702 Specifications:
Model No.
FR-702(Desoldering tool: FR-4103)
Power consumption
1,030W
・Station
Dimensions
370(W)×150(H)×220(D)mm
Weight
9kg
・Station (Soldering)
Output voltage
AC 26V
Temperature range
50 to 480ºC
Temperature stability
±1ºC at idle temperature (When set to 200 to 480ºC)
・Station (Desoldering)
Output voltage
AC 24V
Vacuum generator
Vacuum pump, double cylinder type
Vacuum pressure
80kPa (600mmHg)
Suction flow
15L/min.
Temperature range
330 to 450ºC
Temperature stability
±5ºC at idle temperature
・Station (Hot air)
Power consumption
30W
Air flow
1 to 9 (5 to 115L/min.)L/min.
Temperature range
50 to 600ºC
・Soldering iron
Power consumption
65W (26V)
Tip to ground resistance
<2Ω
Tip to ground potential
<2mV
Heating element
Ceramic heater
Standard tip
Shape-B (No.T18-B)
Cord length
1.2m
Total length
222mm (with B tip)
Weight
52g (with B tip)
・Desoldering Gun
Power consumption
140W (24V)
Nozzle to ground resistance
<2Ω
Nozzle to ground potential
<2mV
Heating element
Composite heater
Standard nozzle
Φ1.0mm S type (No.N61-05)
Cord length
1.2m
Total length
168mm (with Φ1.0mm S type nozzle)
Weight
190g (with Φ1.0mm S type nozzle)
・Handpiece (Hot air)
Power consumption
670W
Total length
250mm
Weight
180g
* The suction flow is measured at the filter case suction port of station. * Airflow capacity is rated as free flowing. Restrictions created by various nozzles may reduce the maximum airflow capacity. * Total length and weight (w/o cord, hose)
Thank you for visiting the only authorised wholesaler of Hakko products in the UK and Ireland. Please note: we have a minimum order value of £250 excluding shipping. Orders under this value will not be processed at checkout. Dismiss