No products in the basket.
Accessories, Cleaning / polishing stations, FT-710, FT-710, FT-710, HAKKO, Product catalogue, Shop by brand, Soldering related equipment 
FT-710 Soldering Tip Cleaner and Polisher
SKU: HFT710-05
Availability:
Low stock – Order soon
older-splash-preventing rotary tip cleaner
Level of solder removal can be adjusted using two different types of brushes. It also reduces the oxidation of tips
Brushes can be replaced without using any tools, and safe design prevents solder wastes from entering drive part
£149.92 Excl. VAT
Low stock – Order soon
Features
| Tip cleaner having both wire-type and sponge-type advantages | |
| Prevents solder from splashing when cleaning. | |
| Inserting just the tip into the receptacle completely prevents solder from splashing. | |
  | |
| Two-types of brushes control how much solder is removed. | |
| Solder removal status can be adjusted by plastic brushes and metallic brushes. | |
| With wire-type cleaners, excessive amounts of solder remain on the tip, which causes solder to splash when soldering. With sponge-type cleaners, oxidation is promoted, which causes shorter tip life. A tip cleaner with both wire-type and sponge-type advantages eliminates the above problems when soldering. | |
| Comparison of how much solder is removed by the different cleaning methods< | |||
| * The photos show the iron tips T12-D24. | |||
 | |||
| Minimizes decrease in temperature of the tip while cleaning. | ||
| Inserting the tip turns the brush automatically; no need to switch it on and off. Reduces the tip cleaning time between soldering works to increase work efficiency. The electric rotary cleaner provides a uniform final cleaning status with no differences between individuals. | ||
| Comparison of decrease in tip temperature by cleaning method | |||||||||
| If decrease in temperature is small, the time for a single cleaning also becomes short. Because cleaning is performed many times per day, the overall working time can be also shortened. | |||||||||
| Time for single cleaning (The time for a single cleaning is measured as the time until the tip temperature reaches the set temperature after cleaning.) | |||||||||
| |||||||||
| The low-noise design relieves stress due to noise during work. | ||
| * This cleaner is very quiet in comparison with competitor’s electric tip cleaner. | ||
| Easy to maintain |  | |
| Easy-to-replace brushes | ||
| Brushes can be replaced without removing any screws. | ||
| Solder left inside is stored in “Solder waste collector”. | ||
| Solder does not splash all over the inside of the main body. | ||
| Safe design prevents brushes from turning unexpectedly during replacement. | ||
| The brush cannot be replaced unless the AC adapter is unplugged. | ||
| This tip cleaner can be attached to HAKKO iron holders HAKKO FH-101, FH-200 and FH-201. | ||
| This tip cleaner can be attached to any of the above 3 iron holders using just 2 screws. For other iron holders, this tip cleaner can be placed next to the iron holder. | ||
 | * The HAKKO FT-710 itself cannot be used as an iron holder. Be sure to use it together with an iron holder. |
Packing List
| * Some soldering irons or tip shapes are NOT available. Please check 'Specification' if your soldering iron or tip shapes are available. |
| Part No. | Packing List |
| FT-710 | HAKKO FT-710, AC adapter, Receptacle A and B, Lock nut, Solder waste collector, Gauge, Instruction manual |
| NOTE: Optional Part Receptacle C being purchased, HAKKO 917(Discontinued) (Station HAKKO 938(Discontinued)) and HAKKO FX-8301(Station HAKKO FX-838) are also available. |
Specifications
| Model No. | FT-710 |
|---|---|
| Rating | DC 24 V 130 mA |
| Brush rotational speed | 2,500rpm |
| Standard receptacle | Receptacle A and B |
| Dimensions | 71(W)×77(H)×107(D) mm |
| Weight | 450g |
・AC Adapter
| Output voltage | DC 24 V |
|---|
| Applicable Soldering Iron List |
| Receptacle | Soldering tip | Unusable shape | Custom-ordered shape | Soldering iron |
| Receptacle A | T7 series | T7-JL02 Spatula | T7-KF | HAKKO FM-2027 Station: HAKKO FM-202 (Discontinued) |
| T11 series | - | - | HAKKO FX-901 | |
| T12 series | T12-JL02 Quad Tunnel Spatula | T12-WB2 T12-WD08 T12-WD12 T12-WD16 T12-WD52 T12-WI T12-DL52 T12-KF | HAKKO FM-2027/2028 for Japan, Oceania, Asia & Other countries Station: HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc. | |
| T15 series | T15-XD15 T15-JL02 T15-JD14 T15-JD16 T15-R48 Quad Tunnel Spatula | T15-1603 T15-1605 T15-BC15 T15-BC28 T15-CF2 T15-CF3 T15-SB03 | HAKKO FM-2027/2028 for North America & EU. Station: HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc. | |
| Receptacle B | T14 series | - | - | HAKKO 957 (Discontinued) |
| T18 series | - | - | HAKKO FX-8801 Station: HAKKO FX-888 (Discontinued), HAKKO FX-888D | |
| T34 series | - | - | DASH:FX-650 series | |
| 900 M series | 900M-T-H 900M-T-1.8H | 900M-T-LB 900M-T-1.2LD | HAKKO 900 Type Medium HAKKO 907 Station: HAKKO 928 (Discontinued), HAKKO 936 (Discontinued), HAKKO 937 (Discontinued) etc. | |
| Receptacle C (Optional Part) | T10 series | - | T10-J02 T10-K T10-KL T10-KU T10-LB T10-LI | HAKKO 917 (Discontinued) Station: HAKKO 938 (Discontinued) |
| T13 series T17 series | - | - | HAKKO FM-2026 Station: HAKKO FM-203, HAKKO FX-950, HAKKO FX-951, HAKKO FX-952, etc. | |
| T20 series | - | T20-K T20-KU T20-BL T20-BL2 T20-BL3 | HAKKO FX-8301 Station: HAKKO FX-838 | |
| T22 series | - | T22-C3 T22-BL T22-BL2 T22-D45 T22-J02 T22-K | HAKKO FM-2030, HAKKO FM-2031 Station: HAKKO FM-206 | |
| Receptacle, custom-designed | T19 series | - | - | HAKKO FX-8805 Station: HAKKO FX-889 |
| T33 series | T33-BC2 T33-BC3 T33-BC4 T33-BC5 T33-BC6 T33-D24 T33-D32 T33-D5 T33-D6 T33-1610 T33-1611 | T33-SSBC2 T33-SSBC3 T33-SSBC4 T33-SSBC5 T33-SSD24 T33-SSD32 T33-SSD16 T33-SSD6 T33-SS1610 T33-SS1611 | HAKKO FX-8802 Station: HAKKO FX-801 | |
| PRESTO series | - | - | HAKKO PRESTO |
| *Soldering iron other than listed above (HAKKO FX-100, HAKKO FM-2032, Built-in solder feed type, Nichrome heater type and HAKKO 455/456), and Desoldering / Rework are not available. |
| Part No. | Name | Specifications | ||
|---|---|---|---|---|
 | A1567 | Cleaning brush B (metal brushes, qty 2) | Buy | |
 | B3519 | Receptacle C | Buy | |
 | B3523 | B3523 Lock nut for FT-710 C | Buy | |
 | B3518 | B3518 Receptacle B for FT-710 | Buy | |
 | A1566 | A1566 Cleaning brush A (plastic brushes, qty 2) | Buy | |
 | B3521 | B3521 Solder waste collector for FT-710 | Buy | |
 | B3520 | B3520 Pulley belt | Buy |
| Weight | 0.7 kg |
|---|
You may also like…
- Shop by brand, HAKKO, Product catalogue, Spare parts, Replacements for accessories, Other parts, FT-710, Replacement cleaning / consumable products, Cleaning stations, FT-710, Wire / brushes
A1566 Cleaning brush A (plastic brushes, qty 2)
Shop by brand, HAKKO, Product catalogue, Spare parts, Replacements for accessories, Other parts, FT-710, Replacement cleaning / consumable products, Cleaning stations, FT-710, Wire / brushesA1566 Cleaning brush A (plastic brushes, qty 2)
Replacement Cleaning Brushes for FT-710 Sodler Tip Cleaner
SKU: HA1566
